[1] Zhang Y S,Yue K,Aleman J,et al.3D bioprinting for tissue and organ fabrication[J].Annals of Biomedical Engineering,2017,45(1):148-163. [2] Kang H W,Lee S J,Ko I K,et al.A 3D bioprinting system to produce human-scale tissue constructs with structural integrity[J].Nature Biotechnology,2016,34(3):312-319. [3] Latimer J M,Maekawa S,Yao Y,et al.Regenerative medicine technologies to treat dental,oral,and craniofacial defects[J].Frontiers in Bioengineering and Biotechnology,2021,9:704048. [4] Maher M,Castilho M,Yue Z,et al.Shaping collagen for engineering hard tissues:Towards a printomics approach[J].Acta Biomaterialia,2021,131:41-61. [5] Kuo K C,Lin R Z,Tien H W,et al.Bioengineering vascularized tissue constructs using an injectable cell-laden enzymatically crosslinked collagen hydrogel derived from dermal extracellular matrix[J].Acta Biomaterialia,2015,27:151-166. [6] Osidak E O,Kozhukhov V I,Osidak M S,et al.Collagen as bioink for bioprinting:A comprehensive review[J].International Journal of Bioprinting,2020,6(3):270. [7] Zhu J,Li Z,Zou Y,et al.Advanced application of collagen-based biomaterials in tissue repair and restoration[J].Journal of Leather Science and Engineering,2022,4(1):30. [8] Matichescu A,Ardelean L C,Rusu L C,et al.Advanced biomaterials and techniques for oral tissue engineering and regeneration-a review[J].Materials,2020,13(22). [9] Murphy S V,Atala A.3D bioprinting of tissues and organs[J].Nature Biotechnology,2014,32(8):773-785. [10] Singh M,Haverinen H M,Dhagat P,et al.Inkjet printing-process and its applications[J].Advanced Materials,2010,22(6):673-685. [11] Cui X,Breitenkamp K,Finn M G,et al.Direct human cartilage repair using three-dimensional bioprinting technology[J].Tissue Engineering Part A,2012,18(11-12):1304-1312. [12] Mandrycky C,Wang Z,Kim K,et al.3D bioprinting for engineering complex tissues[J].Biotechnology Advances,2016,34(4):422-434. [13] Koch L,Gruene M,Unger C,et al.Laser assisted cell printing[J].Current Pharmaceutical Biotechnology,2013,14(1):91-97. [14] Malda J,Visser J,Melchels F P,et al.25th anniversary article:engineering hydrogels for biofabrication[J].Advanced Materials,2013,25(36):5011-5028. [15] Sorushanova A,Delgado L M,Wu Z,et al.The collagen suprafamily:from biosynthesis to advanced biomaterial development[J].Advanced Materials,2019,31(1):e1801651. [16] Ferreira A M,Gentile P,Chiono V,et al.Collagen for bone tissue regeneration[J].Acta Biomaterialia,2012,8(9):3191-3200. [17] Zhang W,Wang X C,Wang J J,et al.Drugs adsorption and release behavior of collagen/bacterial cellulose porous microspheres[J]. International Journal of Biological Macromolecules,2019,140:196-205. [18] Andreassen R C,Ronning S B,Solberg N T,et al.Production of food-grade microcarriers based on by-products from the food industry to facilitate the expansion of bovine skeletal muscle satellite cells for cultured meat production[J].Biomaterials,2022,286:121602. [19] Lubart R,Yariv I,Fixler D,et al.A novel facial cream based on skin-penetrable fibrillar collagen microparticles[J].The Journal of Clinical and Aesthetic Dermatology,2022,15(5):59-64. [20] Tan H,Wu B,Li C,et al.Collagen cryogel cross-linked by naturally derived dialdehyde carboxymethyl cellulose[J].Carbohydrate Polymers,2015,129:17-24. [21] Liu D,Wei G,Li T,et al.Effects of alkaline pretreatments and acid extraction conditions on the acid-soluble collagen from grass carp(Ctenopharyngodon idella)skin[J].Food Chemistry,2015,172:836-843. [22] Han Y,Hu J,Sun G.Recent advances in skin collagen:functionality and non-medical applications[J].Journal of Leather Science and Engineering,2021,3(1):4. [23] Matinong A M E,Chisti Y,Pickering K L,et al.Collagen extraction from animal skin[J].Biology,2022,11(6). [24] Zhang X,Xu S,Shen L,et al.Factors affecting thermal stability of collagen from the aspects of extraction,processing and modification[J].Journal of Leather Science and Engineering,2020,2(1):19. [25] Coppola D,Oliviero M,Vitale G A,et al.Marine collagen from alternative and sustainable sources:extraction,processing and applications[J].Marine Drugs,2020,18(4). [26] 么林妍,凌碧扬,刘晓乐,等.非变性牦牛骨胶原蛋白的提取与表征[J].皮革科学与工程,2022,32(1):9-14. [27] Feng M,Betti M.Transepithelial transport efficiency of bovine collagen hydrolysates in a human Caco-2 cell line model[J].Food Chemistry,2017,224:242-250. [28] Cliche S,Amiot J,Avezard C,et al.Extraction and characterization of collagen with or without telopeptides from chicken skin[J].Poultry Science,2003,82(3):503-509. [29] He L,Lan W,Zhao Y,et al.Characterization of biocompatible pig skin collagen and application of collagen-based films for enzyme immobilization[J].RSC Advances,2020,10(12):7170-7180. [30] 孔丽丽,巩凡,Plavan V,等.酸酶复合法提取鲢鱼鱼鳞胶原蛋白的工艺研究[J].皮革科学与工程,2014,24(4):11-15+20. [31] 瞿怡,苏寒雨,刘文涛,等.超声波辅助法提取牛皮胶原蛋白[J].皮革科学与工程,2018,28(2):5-9. [32] Tan Y Q,Chang S K C.Isolation and characterization of collagen extracted from channel catfish(Ictalurus punctatus)skin[J].Food Chemistry,2018,242:147-155. [33] Meganathan I,Pachaiyappan M,Aarthy M,et al.Recombinant and genetic code expanded collagen-like protein as a tailorable biomaterial[J].Materials Horizons,2022,9(11):2698-2721. [34] Liu W,Merrett K,Griffith M,et al.Recombinant human collagen for tissue engineered corneal substitutes[J].Biomaterials,2008,29(9):1147-1158. [35] Báez J,Olsen D,Polarek J W.Recombinant microbial systems for the production of human collagen and gelatin[J].Applied Microbiology and Biotechnology,2005,69(3):245-252. [36] Lee A,Hudson A R,Shiwarski D J,et al.3D bioprinting of collagen to rebuild components of the human heart[J].Science,2019,365(6452):482-487. [37] Rhee S,Puetzer J L,Mason B N,et al.3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering[J].ACS Biomaterials Science&Engineering,2016,2(10):1800-1805. [38] Muthusamy S,Kannan S,Lee M,et al.3D bioprinting and microscale organization of vascularized tissue constructs using collagen-based bioink[J].Biotechnology and Bioengineering,2021,118(8):3150-3163. [39] Hao L,Tianyuan Z,Zhen Y,et al.Biofabrication of cell-free dual drug-releasing biomimetic scaffolds for meniscal regeneration[J].Biofabrication,2021,14(1). [40] Zhang R,Deng L,Guo J,et al.Solvent mediating the in situ self-assembly of polysaccharides for 3D printing biomimetic tissue scaffolds[J].ACS Nano,2021,15(11):17790-17803. [41] Zhang X,Wang X,Lee Y W,et al.Bioactive scaffold fabricated by 3D printing for enhancing osteoporotic bone regeneration[J].Bioengineering,2022,9(10). [42] Lee J,Kim G.Three-dimensional hierarchical nanofibrous collagen scaffold fabricated using fibrillated collagen and pluronic F-127 for regenerating bone tissue[J].ACS Applied Materials&Interfaces,2018,10(42):35801-35811. [43] Kajave N S,Schmitt T,Nguyen T U,et al.Bioglass incorporated methacrylated collagen bioactive ink for 3D printing of bone tissue[J].Biomed Mater,2021,16(3):13. [44] Liu X Y,Chen C,Xu H H,et al.Integrated printed BDNF/collagen/chitosan scaffolds with low temperature extrusion 3D printer accelerated neural regeneration after spinal cord injury[J].Regenerative Biomaterials,2021,8(6):20. [45] Tan S Y,Yu V S H,Lim K C,et al.Long-term pulpal and restorative outcomes of pulpotomy in mature permanent teeth[J].Journal of Endodontics,2020,46(3):383-390. [46] Moussa D G,Aparicio C.Present and future of tissue engineering scaffolds for dentin-pulp complex regeneration[J].Journal of Tissue Engineering and Regenerative Medicine,2019,13(1):58-75. [47] Jiang S,Yu Z,Zhang L,et al.Effects of different aperture-sized type I collagen/silk fibroin scaffolds on the proliferation and differentiation of human dental pulp cells[J].Regenerative Biomaterials,2021,8(4):rbab028. [48] Yu H,Zhang X,Song W,et al.Effects of 3-dimensional bioprinting alginate/gelatin hydrogel scaffold extract on proliferation and differentiation of human dental pulp stem cells[J].Journal of Endodontics,2019,45(6):706-715. [49] Duarte Campos D F,Zhang S,Kreimendahl F,et al.Hand-held bioprinting for de novo vascular formation applicable to dental pulp regeneration[J].Connective Tissue Research,2020,61(2):205-215. [50] Daghrery A,Ferreira J A,de Souza Araújo I J,et al.A highly ordered,nanostructured fluorinated CaP-coated melt electrowritten scaffold for periodontal tissue regeneration[J].Advanced Healthcare Materials,2021,10(21):e2101152. [51] Sowmya S,Mony U,Jayachandran P,et al.Tri-layered nanocomposite hydrogel scaffold for the concurrent regeneration of cementum,periodontal ligament,and alveolar bone[J].Advanced Healthcare Materials,2017,6(7). [52] Mei N,Wu Y,Chen B,et al.3D-printed mesoporous bioactive glass/GelMA biomimetic scaffolds for osteogenic/cementogenic differentiation of periodontal ligament cells[J].Frontiers in Bioengineering and Biotechnology,2022,10:950970. [53] Lin H H,Chao P G,Tai W C,et al.3D-printed collagen-based waveform microfibrous scaffold for periodontal ligament reconstruction[J].International Journal of Molecular Sciences,2021,22(14). [54] Smith B T,Shum J,Wong M,et al.Bone tissue engineering challenges in oral&maxillofacial surgery[J].Advances in Experimental Medicine and Biology,2015,881:57-78. [55] Perez R A,Ginebra M P.Injectable collagen/α-tricalcium phosphate cement:collagen-mineral phase interactions and cell response[J].Journal of Materials Science Materials in Medicine,2013,24(2):381-393. [56] Wang C,Lai J,Li K,et al.Cryogenic 3D printing of dual-delivery scaffolds for improved bone regeneration with enhanced vascularization[J].Bioactive Materials,2021,6(1):137-145. [57] Inzana J A,Olvera D,Fuller S M,et al.3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration[J].Biomaterials,2014,35(13):4026-4034. [58] Ferreira M, Rzhepishevska O, Grenho L, et al.Levofloxacin- loaded bone cement delivery system:Highly effective against intracellular bacteria and Staphylococcus aureus biofilms[J]. International Journal of Pharmaceutics,2017,532(1):241-248. [59] Martin V, Ribeiro I A, Alves M M, et al.Engineering a multifunctional 3D-printed PLA-collagen-minocycline- nanoHydroxyapatite scaffold with combined antimicrobial and osteogenic effects for bone regeneration[J].Materials Science&Engineering C,Materials for Biological Applications,2019,101:15-26. [60] Liu H,Wang C,Sun X,et al.Silk fibroin/collagen/hydroxyapatite scaffolds obtained by 3D printing technology and loaded with recombinant human erythropoietin in the reconstruction of alveolar bone defects[J].ACS Biomaterials Science&Engineering,2022,8(12):5245-5256. [61] Rajapakse S,Ahmed N,Sidebottom A J.Current thinking about the management of dysfunction of the temporomandibular joint:A review[J].The British Journal of Oral&Maxillofacial Surgery,2017,55(4):351-356. [62] Lee Y H,Park H K,Auh Q S,et al.Emerging potential of exosomes in regenerative medicine for temporomandibular joint osteoarthritis[J].International Journal of Molecular Sciences,2020,21(4). [63] Wang X D,Zhang J N,Gan Y H,et al.Current understanding of pathogenesis and treatment of TMJ osteoarthritis[J].Journal of Dental Research,2015,94(5):666-673. [64] Cui D,Li H,Xu X,et al.Mesenchymal stem cells for cartilage regeneration of TMJ osteoarthritis[J].Stem Cells Anternational,2017:5979741. [65] Yu X,Zhang H,Miao Y,et al.Recent strategies of collagen-based biomaterials for cartilage repair:from structure cognition to function endowment[J].Journal of Leather Science and Engineering,2022,4(1):11. [66] Nguyen T T,Hu C C,Sakthivel R,et al.Preparation of gamma poly-glutamic acid/hydroxyapatite/collagen composite as the 3D-printing scaffold for bone tissue engineering[J].Biomaterials Research,2022,26(1):21. [67] Yang X,Lu Z,Wu H,et al.Collagen-alginate as bioink for three-dimensional(3D)cell printing based cartilage tissue engineering[J].Materials Science&Engineering C,Materials for Biological Applications,2018,83:195-201. [68] Xu J,Zheng S,Hu X,et al.Advances in the research of bioinks based on natural collagen,polysaccharide and their derivatives for skin 3D bioprinting[J].Polymers,2020,12(6):1237. [69] Chouhan D,Dey N,Bhardwaj N,et al.Emerging and innovative approaches for wound healing and skin regeneration:Current status and advances[J].Biomaterials,2019,216:119267. [70] Pati F,Jang J,Ha D H,et al.Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink[J].Nature Communications,2014,5:3935. [71] Yang Y,Xu R,Wang C,et al.Recombinant human collagen-based bioinks for the 3D bioprinting of full-thickness human skin equivalent[J].International Journal of Bioprinting,2022,8(4):611. [72] Shi Y,Xing T L,Zhang H B,et al.Tyrosinase-doped bioink for 3D bioprinting of living skin constructs[J].Biomedical Materials,2018,13(3):035008. |