皮革科学与工程 ›› 2022, Vol. 32 ›› Issue (5): 40-42.doi: 10.19677/j.issn.1004-7964.2022.05.008

• 材料工艺 • 上一篇    下一篇

制革企业污水处理系统改造工程实例

高新红, 张玉华   

  1. 河南省商丘生态环境监测中心,河南 商丘 476000
  • 收稿日期:2022-01-20 出版日期:2022-10-28 上线日期:2022-10-10
  • 作者简介:高新红(1968.11-),男,农学学士,高级工程师,主要从事环境管理、环境监测、环境治理方面的工作,E-mail:gaoxh_666@163.com。

An Example of Transformation Project of Wastewater Treatment System in a Tannery

GAO Xinhong, ZHANG Yuhua   

  1. Henan Province Shangqiu Ecological Environment Monitoring Center, Shangqiu 476000, China
  • Received:2022-01-20 Online:2022-10-28 Published:2022-10-10

摘要: 某制革企业原有污水处理采用“预曝气调节池→初沉→氧化沟→二沉池→芬顿→斜管沉淀池”处理工艺,随着生产规模的扩大和废水排放标准的提高,原有工艺不能满足处理要求。通过对制革废水原有废水处理系统进行改造,采用“调节沉淀→预缺氧池→A/O池→二沉池→芬顿处理→斜管沉淀”处理工艺后,出水主要污染物浓度均能满足《惠济河流域水污染物排放标准》(DB41/918-2014)表 1标准要求,处理成本下降,污染物得到了有效削减,具有较好的环境效益和经济效益。

关键词: 制革废水, 改造工程, 预缺氧池—A/O池—芬顿, 环境效益

Abstract: The original wastewater treatment system in a tannery, whose process is "pre-aeration regulation tank→initial sedimentation→oxidation ditch→secondary sedimentation tank→Fenton treatment→ inclined pipe sedimentation tank", cannot meet the treatment requirements owing to the expansion of production scale and the improvement of wastewater discharge standards. Thus, the transformation project of the original wastewater treatment system was conducted, in which the treatment process of "adjusting sedimentation→pre-anoxic tank→A/O tank→second sedimentation tank→Fenton treatment→inclined pipe precipitation" was adopted. The concentrations of main pollutants in the effluent of the modified system can meet the standard requirements shown in Table 1 of "Discharge Standard of Water Pollutants in Huiji River Basin" (DB41/918-2014). Furthermore, the treatment cost was decreased and the pollutants were effectively reduced, which has good environmental and economic benefits.

Key words: tannery wastewater, transformation project, pre-anoxic pool-A/O pool-Fenton, environmental benefit

中图分类号: