皮革科学与工程 ›› 2020, Vol. 30 ›› Issue (5): 78-83.doi: 10.19677/j.issn.1004-7964.2020.05.015

• 其他研究及报道 • 上一篇    下一篇

基于CNKI(2000-2019年)的制革研究文献可视化计量分析

江明芳1, 程海明2   

  1. 1.成都工业学院教务处,四川 成都 611730;
    2.四川大学制革清洁技术国家工程研究中心,四川 成都 610065
  • 收稿日期:2020-02-20 上线日期:2020-09-25
  • 作者简介:江明芳(1991-),女,硕士,助理研究员。研究方向:高等教育管理研究。E-mail:sujmf@163.com。

Visual Metrological Analysis of Leather-Making Research Literature Based on CNKI(2000-2019)

JIANG Mingfang1, CHENG Haiming2   

  1. 1. Academic Affairs Office, Chengdu Technological University, Chengdu 611730, China;
    2. National Engineering Research Center of Clean Technology in Leather Industry, Sichuan University, Chengdu 610065, China
  • Received:2020-02-20 Published:2020-09-25

摘要: 以2000-2019年中国知网CNKI数据库所收录的制革研究文献为样本,采用Citespace软件以可视化计量的方法对制革研究进行分析,客观生动地呈现了制革研究进展和演变趋势。研究结果发现:(1)近二十年中文文献产出量呈逐年增加又降低的现象,2010年达到峰值(126篇),整体上文献产出量有略微下降的趋势;(2)空间上呈现了以四川大学和陕西科技大学为“双核心”的多种合作模式并存的学术环境;(3)除了制革基础工艺,制革废水、制革污泥、清洁技术等一直是制革领域受关注的热点课题。在制革废水研究主题中,重点关注了化学需氧量、氨氮、重金属铬等污染治理问题,探究了SBR(间歇式活性污泥法)等具体处理技术,以及制革废水的深度处理。同时研究者也关注制革从业人员的职业健康,勇于承担起社会责任。

关键词: 制革, 制革废水, 文献, 深度处理, 可视化, 计量分析

Abstract: The domestic leather-making literatures collected by CNKI (China National Knowledge Infrastructure) from 2000 to 2019 were analyzed by using Citespace software by mean of visual metrological method. This analysis could objectively and vividly present the progress and evolution trend of leather-making research. The main results are as follows: (1) the number of Chinese literature increased and then decreased over the past two decades, and reached a peak in 2010 (126 articles), and on the whole, there was a slight decline in the output of Chinese literature; (2) in terms of space, the dual-core academic environment with multiple cooperation modes was formed between Sichuan University and Shaanxi University of Science and Technology; (3) besides the basic leather-making technology, tannery wastewater, tannery sludge and cleaner production technology have been the hot research topics in the field of leather-making research. Especially, in the research topic of tannery wastewater, the main focuses were paid on the treatment of pollutants such as chemical oxygen demand, ammonia nitrogen and heavy metal chromium, and specific treatment technologies such as SBR (sequencing batch reactor) method were explored, as well as the in-depth treatment of tannery wastewater. Meanwhile, the occupational health of tanners has also been concerned, which indicates the courage of researchers to assume social responsibility.

Key words: leather-making, tannery wastewater, literature, in-depth treatment, visualization, metrological analysis

中图分类号: