数值模拟与鞋靴热湿舒适性评测

doi:10.19677/j.issn.1004-7964.2024.02.008

皮革科学与工程 ›› 2024, Vol. 34 ›› Issue (2): 54-60.doi: 10.19677/j.issn.1004-7964.2024.02.008

数值模拟与鞋靴热湿舒适性评测

弓太生^1,2, 张诗雨^1,*, 康路平², 杜美娴¹, 吴婷³, 覃义婷¹

1.陕西科技大学轻化工程国家级实验教学示范中心,陕西西安 710021;
2.陕西科技大学设计与艺术学院,陕西西安 710021;
3.际华三五一五皮革皮鞋有限公司,河南漯河 462000

收稿日期:2023-04-10 修回日期:2023-05-27 接受日期:2023-05-29 出版日期:2024-04-01 上线日期:2024-03-07
通讯作者: *张诗雨（1999-）,女,硕士研究生,研究方向：皮革终端产品的材料、结构与功能研究。E-mail：z2630322973@163.com。
作者简介:弓太生（1962-）,男,博导,教授,主要从事皮革终端产品的材料、结构与功能研究。E-mail：skdgts@126.com。

Numerical Simulation and Evaluation of Thermal-wet Comfort of Footwear

GONG Taisheng^1,2, ZHANG Shiyu^1,*, KANG Luping², DU Meixian¹, WU Ting³, QIN Yiting¹

1. National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi’an 710021, China;
2. College of Art and Design, Shaanxi University of Science & Technology, Xi’an 710021, China;
3. Jihua 3515 Leather and Leather Shoe Co.,Ltd., Luohe 462000, China

Received:2023-04-10 Revised:2023-05-27 Accepted:2023-05-29 Published:2024-04-01 Online:2024-03-07

摘要/Abstract

摘要： 热湿舒适性是鞋靴舒适性的重要组成部分。基于知网和Web of Science等数据库,文章对20年来文献中有关鞋靴热湿舒适性的评测方法进行了分析、总结和评价,并介绍了数值模拟用于鞋靴热湿舒适性评测的原理和具体案例,为建立系统的鞋靴热湿舒适性评价体系和制订鞋靴热湿舒适性评价标准提供借鉴和参考。

关键词: 数值模拟, 鞋靴, 热湿舒适性, 评测方法

Abstract: Thermal-wet comfort is an important part of shoe comfort. Based on databases such as CNKI and Web of Science, this paper analyzed, summarized and evaluated the evaluation methods of thermal-wet comfort of footwear over the past 20 years. It also introduced the principle and specific cases of numerical simulation for thermal-wet comfort evaluation of footwear, which can serve as a reference for establishing systematic evaluation system of thermal-wet comfort of footwear and formulating evaluation standard of thermal-wet comfort of footwear.

Key words: numerical simulation, footwear, thermal-wet comfort, detecting and evaluating method

中图分类号:

TS943

弓太生, 张诗雨, 康路平, 杜美娴, 吴婷, 覃义婷. 数值模拟与鞋靴热湿舒适性评测[J]. 皮革科学与工程, 2024, 34(2): 54-60.

GONG Taisheng, ZHANG Shiyu, KANG Luping, DU Meixian, WU Ting, QIN Yiting. Numerical Simulation and Evaluation of Thermal-wet Comfort of Footwear[J]. Leather Science and Engineering, 2024, 34(2): 54-60.

参考文献

[1] MENZ H,BONANNO D.Footwear comfort:a systematic search and narrative synthesis of the literature[J].Journal of Foot and Ankle Research,2021,14(1):63.
[2] PUSZKARZ A,USUPOV A.The study of footwear thermal insulation using thermography and the finite volume method[J].International Journal of Thermophysics,2019,40(4):45.
[3] WEST A,SCHÖNFISCH D,PICARD A,et al.Shoe microclimate:An objective characterisation and subjective evaluation[J].Applied Ergonomics,2019,78:1-12.
[4] 陈大志. 运动鞋热湿舒适性的检测方法研究[J].皮革科学与工程,2015,25(3):55-58.
CHEN D Z.Research on test method of thermal-wet comfort for sport shoes[J].Leather Sci Eng,2015,25(3):55-58.(in Chinese)
[5] KUKLANE K.Protection of feet in cold exposure[J].Industrial Health,2009,47(3):242-253.
[6] RAZUMEV K,ANIS’KOVA V,FEDOROVA N,et al.Producing nonwoven materials for the shoe industry[J].Fibre Chemistry,2022,54(3):189-192.
[7] IRZMANSKA E,BROCHOCKA A,MAJCHRZYCKA K,et al.Textile composite materials with bioactive melt-blown nonwovens for protective footwear[J].Fibres&textiles in Eastern Europe,2012,20(6):119-125.
[8] KONG P,LIM C,DING R,et al.Subjective evaluation of running footwear depends on country and assessment method:a bi-national study[J].Ergonomics,2015,58(9):1589-1604.
[9] YANG Y,HAO X M,HAO X,et al.Investigate on moisture absorption/desorption of shoe material containing hemp fiber[J].Advanced Materials Research,2012,627:49-52.
[10] 闵宝乾,丁绍兰,葛伟慧.皮革的导热系数与保温性能测试[J].中国皮革,2012,41(15):8-11+16.
MIN B Q,DING S L,GE W H.Test of heat conduction coefficient and heat preservation performance of leathers[J].China Leather,2012,41(15):8-11+16.(in Chinese)
[11] AREZES P,NEVES M,TEIXEIRA S,et al.Testing thermal comfort of trekking boots:An objective and subjective evaluation[J].Applied Ergonomics,2013,44(4):557-565.
[12] IRZMANSKA E,DUTKIEWICZ J,IRZMANSKI R,et al.New approach to assessing comfort of use of protective footwear with a textile liner and its impact on foot physiology[J].Textile Research Journal,2014,84(7):728-738.
[13] KRANER Z,MEKJAVIC I,RIJAVEC T.Properties of laminated silica aerogel fibrous matting composites for footwear applications[J].Textile Research Journal,2016,86(10):1063-1073.
[14] 弓太生,陈小燕,周素静,等.防寒鞋保温性能的测评方法[J].皮革科学与工程,2021,31(2):62-67.
GONG T S,CHEN X Y,ZHOU S J,et al.Evaluation methods of heat preservation performance of cold-proof footwear[J].Leather Sci Eng,2021,31(2):62-67.(in Chinese)
[15] 张丹云,杜晓声,陈慧.涂饰过程中油蜡的使用对皮革性能的影响[J].皮革科学与工程,2013,23(2):31-33+37.
ZHANG D Y,DU X S,CHEN H.The influence of the application of oil and wax in finishing on leather performance[J].Leather Sci Eng,2013,23(2):31-33+37.(in Chinese)
[16] FORDZYUN Y,ANDREYEVA O,MAISTRENKO L.Level of comfort:Artificial and natural shoe materials.A comprehensive assessment[J].Key Engineering Materials,2013,2420(559):25-30.
[17] YANG Y,WANG X,LIU Z,et al.Heat and moisture transfer in fabric consisting of fibers with low hygroscopicity[J].Textile Research Journal,2022,92(23-24):4764-4777.
[18] MANDAL S,ANNAHEIM S,CAMENZIND M,et al.Characterization and modelling of thermal protective performance of fabrics under different levels of radiant-heat exposures[J].Journal of Industrial Textiles,2019,48(7):1184-1205.
[19] MAO A,LI Y.Numerical heat transfer coupled with multidimensional liquid moisture diffusion in porous textiles with a measurable-parameterized model[J].Numerical Heat Transfer:Part A:Applications,2009,56(3):246-268.
[20] ZHENG Z,ZHANG N,ZHAO X.Simulation of heat transfer through woven fabrics based on the fabric geometry model[J].Thermal Science,2018,22(6 Part B):2815-2825.
[21] FAN J, WANG L, CHENG Q, et al.Thermal analysis of biomimic woven fabric based on finite element method[J].Journal of Thermal Analysis and Calorimetry,2015,121(2):737-742.
[22] PUSZKRZ A,MACHNOWSKI W,BLASINSKA A.Modeling of thermal performance of multilayer protective clothing exposed to radiant heat[J].Heat and Mass Transfer,2020,56(6):1767-1775.
[23] RENARD M,PUSZKARZ A.Modeling of heat transfer through firefighters multilayer protective clothing using the computational fluid dynamics assisted by X-ray microtomography and thermography[J].Materials,2022,15(15):5417.
[24] SU Y,HE J,LI J.Modeling the transmitted and stored energy in multilayer protective clothing under low-level radiant exposure[J].Applied Thermal Engineering,2016,93(C):1295-1303.
[25] 丁绍兰,弓太生,葛伟慧,等.皮鞋帮面卫生性能数学建模[J].皮革科学与工程,2009,19(1):57-61+80.
DING S L,GONG T S,GE W H,et al.Mathematic modeling expression of hygienic property of shoe upper leather[J].Leather Sci Eng,2009,19(1):57-61+80.(in Chinese)
[26] 孙伟忠. 基于数学建模的不同皮鞋帮面卫生性能分析[J].中国皮革,2022,51(12):79-83.
SUN W Z.Analysis of hygienic performance of different leather upper based on mathematical modeling[J].China Leather,2022,51(12):79-83.(in Chinese)
[27] HORASHCHENKO S,HORASHCHENKO K,POLISHCHUK O.Mathematical modeling of heat protective properties of polymeric materials for footwear[J].Advanced chemical technologies and materials for industry and the environment,2020,15(3):84-87.
[28] KUKLANE K,AFANASIEVA R,BURMISTROVA O,et al.Determination of heat loss from the feet and insulation of the footwear[J].International Journal of Occupational Safety and Ergonomics,2015,5(4):465-476.
[29] KUKLANE K.The use of footwear insulation values measured on a thermal foot model[J].International journal of occupational safety and ergonomics:JOSE,2004,10(1):79-86.
[30] WEST A,FLORIAN O,JAMES T,et al.A thermal foot manikin as a tool for footwear evaluation and development[J].Proceedings of the Institution of Mechanical Engineers,Part P Journal of Sports Engineering and Technology,2020,38(1):2590-2603.
[31] ENDRUSICK T,COLE D,MATONICH P.Effects of simulated sustained operations on the thermal insulation of military footwear[M].Massachusetts:Elsevier Ergonomics Book Series,2005,3:389-393.
[32] BOGERD C,BRUHWILER P,ROSSI R.Heat loss and moisture retention variations of boot membranes and sock fabrics:A foot manikin study[J].International Journal of Industrial Ergonomics,2012,42(2):212-218.
[33] IRZMANSKA E,DUTKIEWICZ J.Preliminary evaluation of airlaid nonwovens with superabsorbent for use in protective footwear:Tests involving a thermal foot model and climatic chamber[J]Fibres&Textiles in Eastern Europe.2015,23(6):138-142.
[34] GARCIA-HERNANDEZ C,EDUARDO J,HUSR-TALÓN J.Foot model for tracking temperature of safety boot insoles:Application to different insole materials in firefighter boots[J].International Journal of Occupational Safety&Ergonomics Jose,2015,22(1):12-19.
[35] 任萍,杨阳,刘静.人体足部传热数值模拟及加热实验[J].纺织学报,2009,30(3):99-105.
REN P,YANG Y,LIU J.Numerical simulation of heat transfer of human foot and heating experiments[J].Journal of Textile Research,2009,30(3):99-105.(in Chinese)
[36] MA W,LIU W,LI M.Modeling heat transfer from warm water to foot:Analytical solution and experimental validation[J].International Journal of Thermal Sciences,2015,98:364-373.
[37] TURKYILMAZOGLU M.Heat transfer from warm water to a moving foot in a footbath[J].Applied Thermal Engineering,2016,98:280-287.
[38] FIALA D,LOMAS K J,STOHRER M.Computer prediction of human thermoregulatory and temperature responses to a wide range of environmental conditions[J].International journal of biometeorology,2001,45(3):143-159.
[39] MIAO T,LI Y.Modeling the thermal microenvironment of footwear subjected to forced ventilation[J].Ergonomics,2022,65(12):22-29.
[40] HUIZENGA C,ZHANG H,ARENS E.A model of human physiology and comfort for assessing complex thermal environments[J].Building and Environment,2001,36(6):691-699.
[41] EHAB F,KAI S.A new approach using the Pierce two-node model for different body parts[J].International journal of biometeorology,2011,55(4):519-532.
[42] HOFER P,HASLER M,FAULAND G,et al.Temperature,relative humidity and water absorption in ski boots[J].Procedia Engineering,2011,13:44-50.
[43] WEI Z,ZHAO W,YUAN P,et al.Testing the microclimate in sports shoes by a new manikins measurement system[C].IOP Conference Series: Materials Science and Engineering,2020, 964(1):2007.
[44] YICK K,YU A,LI P.Insights into footwear preferences and insole design to improve thermal environment of footwear[J].International Journal of Fashion Design,Technology and Education,2019,12(3):325-334.
[45] HE C,KORPOSH S,CORREIA R,et al.Optical fibre sensor for simultaneous temperature and relative humidity measurement:Towards absolute humidity evaluation[J].Sensors and Actuators B:Chemical,2021,344:130154.
[46] SHIMAZAKI Y,MURATA M.Effect of gait on formation of thermal environment inside footwear[J].Applied Ergonomics,2015, 49:55-62.
[47] LI P,YICK K,YIP J,et al.Influence of upper footwear material properties on foot skin temperature,humidity and perceived comfort of older individuals[J].International Journal of Environmental Research and Public Health,2022,19(17):10861.
[48] IRZMANSKA E.The impact of different types of textile liners used in protective footwear on the subjective sensations of firefighters[J].Applied Ergonomics,2015,47:34-42.
[49] IRZMANSKA E.The microclimate in protective fire fighter footwear:Foot temperature and air temperature and relative humidity[J].Autex Research Journal,2016,16(2):75-79.
[50] COPETTI M, DURANG J, FERNANDEZ J, et al.Numerical analysis and simulation of a bio-thermal model for the human foot[J].Applied Mathematics and Computation,2017,305:103-116.
[51] PREK M.Thermodynamic analysis of human heat and mass transfer and their impact on thermal comfort[J].International Journal of Heat and Mass Transfer,2004,48(3):731-739.
[52] WANG M,LI S,TEO E C,et al.The influence of heel height on strain variation of plantar fascia during high heel shoes walking-combined musculoskeletal modeling and finite element analysis[J].Frontiers in Bioengineering and Biotechnology,2021,9:791238.
[53] SUN D,SONG Y,CEN X,et al.Workflow assessing the effect of Achilles tendon rupture on gait function and metatarsal stress:Combined musculoskeletal modeling and finite element analysis[J].Proceedings of the Institution of Mechanical Engineers.Part H,Journal of engineering in medicine,2022, 236(5):676-685.
[54] MIAO T.Footwear microclimate and its ventilation control[D].HK:HKU Theses Online(HKUTO),2021.
[55] CHORNY A, CHERUNOVA I, KORNEV N, et al.Thermophysical interaction in the shoe-foot system during sport activity[J].International Journal of Heat and Mass Transfer,2021,6(12):35-42.
[56] COVILL D, GUAN Z W, BAILEY M, et al.Development of thermal models of footwear using finite element analysis[J].Proceedings of the Institution of Mechanical Engineers,Part H:Journal of Engineering in Medicine,2011,1(1):1-14.

数值模拟与鞋靴热湿舒适性评测

Numerical Simulation and Evaluation of Thermal-wet Comfort of Footwear

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 12

编辑推荐

Metrics

本文评价

[1]	杨思容, 许馨, 谢天晓, 曹中华, 张伟娟. “零缝纫”在鞋靴设计中的应用研究[J]. 皮革科学与工程, 2023, 33(6): 85-91.
[2]	王育星, 许杰婷. 论现代鞋靴设计中传统戏曲服饰元素之沁润[J]. 皮革科学与工程, 2023, 33(5): 86-90.
[3]	罗明, 邱艳, 李明武. 中国鞋靴产品对“一带一路”沿线国家出口贸易潜力研究——基于拓展的贸易引力模型的实证分析[J]. 皮革科学与工程, 2023, 33(2): 103-108.
[4]	史忠文, 盛锐. 鞋靴金属配饰设计工艺及应用[J]. 皮革科学与工程, 2022, 32(6): 79-83.
[5]	弓太生, 郭思逸, 高倩, 郭永刚, 吴婷. 护踝抗扭转功能鞋靴的运动稳定性测试[J]. 皮革科学与工程, 2022, 32(2): 88-93.
[6]	黄其斌, 罗明, 周菁菁, 李明武. 中国制鞋产业国际竞争力演变态势——基于中国、越南、意大利三国的比较分析[J]. 皮革科学与工程, 2022, 32(1): 98-102.
[7]	高强, 何飞龙, 陈逸阳. 汉画像乐舞图案在鞋靴设计中的运用[J]. 皮革科学与工程, 2021, 31(5): 66-70.
[8]	邱艳, 周菁菁, 李明武. 中国鞋靴产品出口市场集中度及依赖度分析[J]. 皮革科学与工程, 2021, 31(4): 87-92.
[9]	沈光来, 李晓敏. 鞋类热湿舒适性检测标准研究[J]. 皮革科学与工程, 2020, 30(3): 55-58.
[10]	弓太生, 高倩, 周素静, 吴婷, 陈小燕. 鞋靴抗扭转技术的研究进展[J]. 皮革科学与工程, 2020, 30(2): 25-29.
[11]	李田, 张晓凡. 禅意美学在鞋靴设计中的应用[J]. 皮革科学与工程, 2020, 30(2): 77-80.
[12]	周金超, 孙家珏, . 手工鞋靴高级定制的现状与前景[J]. 皮革科学与工程, 2019, 29(01): 35-38.