皮革科学与工程 ›› 2020, Vol. 30 ›› Issue (3): 35-39.doi: 10.19677/j.issn.1004-7964.2020.03.006

• 材料工艺技术 • 上一篇    下一篇

聚合铝盐制备与应用研究

王邵腾1,2, 韩凯翔1,2, 单志华1,2,*   

  1. 1.制革清洁技术国家工程实验室(四川大学),四川 成都 610065;
    2.四川大学皮革化学与工程教育部重点实验室(四川大学),四川 成都 610065
  • 收稿日期:2019-12-15 出版日期:2020-06-28 上线日期:2020-05-26
  • 通讯作者: *
  • 作者简介:王邵腾,硕士研究生,研究方向制革清洁技术。
  • 基金资助:
    江苏省计划项目(SZ-XZ2017014-01)

Study on Preparation and Application of Polyaluminum Salt

WANG Shaoteng1,2, HAN Kaixiang1,2, SHAN Zhihua1,2,*   

  1. 1.Nationa Engineering Laboratory for Clean Technology of Leather Manufacture, Sichuan University, Chengdu 610065, China;
    2.Key Laboratory of Leather Chemistry and Engineering of Ministry of Education, Sichuan University, Chengdu 610065, China
  • Received:2019-12-15 Online:2020-06-28 Published:2020-05-26

摘要: 以AlCl3·6H2O为原料,通过微量加碱法制备了聚合铝PAC及聚合铝鞣剂PAT。实验表征了PAC的Aln(OH)m的结构特征;测定了PAT的溶解性和悬浊液中粒度分布与静置时间相关性;考察PAT的耐盐、栲胶溶液及加脂剂乳液的稳定性。结果表明三种材料的稳定性与时间相关。将PAT应用于制革的主鞣和复鞣工序表明,PAT作复鞣剂使用后坯革粒面细致,厚度显著增加,物理力学性能均有所提高。

关键词: 聚合铝, 鞣剂, 结构, 复鞣, 应用

Abstract: Using AlCl3·6H2O as a raw material, polyaluminum (PAC) and polyaluminum tanning agent (PAT) were prepared by a slight alkali addition method. The Aln(OH)m structure of PAC was characterized experimentally. The solubility of PAT and the correlation between standing time and the particle size distribution in the suspension were measured. The stability of PAT solutions mixed with salt,vegetable extract and fat-resistant emulsion was investigated. The results show that the stability of the three solutions is related to the storage time. The application of PAT to the main tanning and retanning processes of leather indicated that the grain surface was fine, the thickness was increased significantly,the physical and mechanical properties were improved.

Key words: polymeric aluminum, tanning agent, structure, retanning, application

中图分类号: