3D打印支撑鞋垫对扁平足足底压力分布的影响

doi:10.19677/j.issn.1004-7964.2022.03.0016

Leather Science and Engineering ›› 2022, Vol. 32 ›› Issue (3): 85-89.doi: 10.19677/j.issn.1004-7964.2022.03.0016

Previous Articles Next Articles

Effect of 3D Printed Arch-support Insoles on Plantar Pressure Distribution in Flat Feet

ZHAO Suilang^1,2, QI Zirui¹, CAO Zhonghua³, YU Baiji¹

1. Beijing Institute of Fashion Technology, Beijing 100029, China;
2. Beijing Sport University,Beijing 100084,China;
3. Guangzhou Lvpu Technology Co., Guangzhou 510425, China

Received:2021-08-28 Published:2022-06-28 Online:2022-05-16

Abstract

Abstract: To investigate the effects of different arch-support structures on plantar pressure distribution, a scanner was used to obtain three weight-bearing conditions (full-weight-bearing,semi-weight-bearing,and non-weight-bearing) foot models of nine young women with flat feet. Three types of arch-support insoles (Type I, Type II, and Type III) and one type of non-support insole were customized; the plantar pressure test system was used to compare the distribution of contact time and plantar pressure distribution characteristics of the three types of arch-support insoles during the stance phase of gait of flat feet. Subjective ratings including static comfort and dynamic comfort were assessed for each participant. The results showed that compared with unsupported insoles, type II and type III insoles significantly reduced the total contact time during the stance phase (P=0.002 and P=0.026, respectively); all three types of arch-support insoles shifted the COP trajectory medially during the stance phase, and the shifting increased with the increase of the height of the supportive structure. The appropriate arch support insoles can optimize the contact time and COP trajectory during the stance phase, which provides a theoretical basis for the design of personalized orthopedic insoles.

Key words: 3D printing, arch-support, custom insoles, flatfoot, plantar pressure

CLC Number:

TS943

ZHAO Suilang, QI Zirui, CAO Zhonghua, YU Baiji. Effect of 3D Printed Arch-support Insoles on Plantar Pressure Distribution in Flat Feet[J]. Leather Science and Engineering, 2022, 32(3): 85-89.

References

[1] Buldt A K, Murley G S, Butterworth P, et al.The relationship between foot posture and lower limb kinematics during walking: A systematic review[J]. Gait & Posture, 2013, 38(3): 363-372.
[2] Murley G S, Menz H B, Landor F K B. Foot posture influences the electromyographic activity of selected lower limb muscles during gait[J]. Journal of Foot and Ankle Research, 2009, 2(1): 35.
[3] A G D, B M H, C J B, et al.Effect of foot orthosis design on lower limb joint kinematics and kinetics during walking in flexible pes planovalgus : A systematic review and meta-analysis[J]. Clinical Biomechanics, 2018, 59: 117-129.
[4] Bonanno D R, Landorf K B, Munteanu S E, et al.Effectiveness of foot orthoses and shock-absorbing insoles for the prevention of injury: a systematic review and meta-analysis[J]. British Journal of Sports Medicine, 2016, 51(2): 86.
[5] Landorf K B, Keenan A M, Herbert R D.Effectiveness of Different Types of Foot Orthoses for the Treatment of Plantar Fasciitis[J]. Journal of the American Podiatric Medical Association, 2004, 94(6): 542-549.
[6] Gross M T, Foxworth J L.The role of foot orthoses as an intervention for patellofemoral pain.[J]. Journal of Orthopaedic & Sports Physical Therapy, 2003, 33(11): 661.
[7] 赵碎浪,杨峰,傅陆军.鞋垫对足底压力舒适性影响研究进展[J].中国皮革,2018,(9):57-60.
[8] Mulford D, Taggart H M, Nivens A, et al.Arch support use for improving balance and reducing pain in older adults[J]. Applied Nursing Research, 2008, 21(3): 153-158.
[9] Zhang X, Bo L, Liang K, et al.An optimized design of in-shoe heel lifts reduces plantar pressure of healthy males[J]. Gait & posture, 2016, 47: 43-7.
[10] Patrick, Williamson, Aron, et al. Pressure Distribution in the Ankle and Subtalar Joint With Routine and Oversized Foot Orthoses[J]. Foot and ankle international, 2018, 39(8): 994-1000.
[11] Khodaei B, Saeedi H, Jalali M, et al.Comparison of plantar pressure distribution in CAD-CAM and prefabricated foot orthoses in patients with flexible flatfeet[J]. The Foot, 2017, 33: 76-80.
[12] 赵碎浪,杨峰,曹中华,等.正常足与扁平足步行支撑期足弓角变化研究[J].皮革科学与工程,2021,31(4):55-58.
[13] Tsung B, Ming Z, Mak A, et al.Effectiveness of insoles on plantar pressure redistribution[J]. Journal of Rehabilitation Research & Development, 2004, 41(6A): 767.
[14] Williams D S, Mcclay I S.Measurements used to characterize the foot and the medial longitudinal arch: reliability and validity.[J]. Physical Therapy, 2000(9): 864-71.
[15] Harrison K D, Mccrory J L.Caliper Method Versus Digital Photogrammetry for Assessing Arch Height Index in Pregnant Women[J]. J Am Podiatr Med Assoc, 2016, 106(6): 406-410.
[16] 赵碎浪,杨峰,傅陆军.足型分类方法研究进展[J].中国皮革,2020,(7):7-12.
[17] Zuil-Escobar J C,CB Martínez-Cepa,JA Martín-Urrialde,et al.Evaluating the Medial Longitudinal Arch of the Foot:Correlations,Reliability,and Accuracy in People With a Low Arch[J].Physical Therapy,2019(3):364-372.
[18] Gerrard J M,Bonanno D R,Whittaker G A,et al.Effect of different orthotic materials on plantar pressures:a systematic review[J].Journal of Foot and Ankle Research,2020,13(1),1-11.
[19] Blanc Y,Balmer C,Landis T,et al.Temporal parameters and patterns of the foot roll over during walking:Normative data for healthy adults[J].Gait&Posture,1999,10(2):97-108.
[20] D.Gordon,Robertson E,Caldwell G E.Research Methods in Biomechanics[M].Research Methods in Biomechanics,2013.
[21] Chiu M C,Wu H C,Chang L Y.Gait speed and gender effects on center of pressure progression during normal walking[J].Gait&Posture,2013,37(1):43-48.
[22] Aynollah,Naderi,Hans,et al.Arch-support foot-orthoses normalize dynamic in-shoe foot pressure distribution in medial tibial stress syndrome.[J].European Journal of Sport Science,2019,19(2):247-257.
[23] Mizrahi J,Verbitsky O,Isakov E,et al.Effect of fatigue on leg kinematics and impact acceleration in long distance running[J].Human Movement Science,2000,19(2):139-151.
[24] Iii D,Mcclay I S,Hamill J.Arch structure and injury patterns in runners[J].Clinical Biomechanics,2001,16(4):341-347.
[25] 朱世杰,王文婷,章露.足部姿态变化对静态姿势稳定控制的即刻作用[J].中国组织工程研究,2012,16(37):6910-6915.
[26] Zhang X,Bo L,Hu K,et al.Adding an arch support to a heel lift improves stability and comfort during gait[J].Gait&posture,2017,58:94-97.
[27] Bus S A,Ulbrecht J S,Cavanagh P R.Pressure relief and load redistribution by custom-made insoles in diabetic patients with neuropathy and foot deformity[J].Clinical Biomechanics,2004,19(6):629-638.
[28] Li B,Xiang Q,Zhang X.The center of pressure progression characterizes the dynamic function of high-arched feet during walking[J].Journal of Leather Science and Engineering,2020,2(1):1.
[29] Cock A D,Vanrenterghem J,Willems T,et al.The trajectory of the centre of pressure during barefoot running as a potential measure for foot function[J].Gait&Posture,2008,27(4):669-675.
[30] Buldt A K,Forghany S,Landorf K B,et al.Foot posture is associated with plantar pressure during gait:a comparison of normal,planus and cavus feet[J].Gait&Posture,2018,62:235.
[31] Aquino A,Payne C.Function of the windlass mechanism in excessively pronated feet.[J].Journal of the American Podiatric Medical Association,2001,91(5):245.
[32] Kirby K A.Subtalar Joint Axis Location and Rotational Equilibrium Theory of Foot Function[J].Journal of the American Podiatric Medical Association,2001,91(9):465-487.
[33] Shelburne K B,Torry M R,Steadman J R,et al.Effects of foot orthoses and valgus bracing on the knee adduction moment and medial joint load during gait[J].Clinical Biomechanics,2008,23(6):814-821.
[34] 燕晓宇,俞光荣.获得性扁平足的基础研究进展[J].中国矫形外科杂志,2004,12(21):1715-1717.

Effect of 3D Printed Arch-support Insoles on Plantar Pressure Distribution in Flat Feet

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	ZHAO Suilang, MA Ruiya, TENG Jin, XING Rui, QU Feng. Research Progress on The Influence of Toe Spring Parameters Design on Biomechanical Characteristics of Walking [J]. Leather Science and Engineering, 2024, 34(3): 51-57.
[2]	SUN Xin, LOU Benjing, XIE Lu, BIAN Ba. Comparative Analysis of Plantar Pressure Distribution Characteristics of Healthy Young People Living in Plateau and Migrating to Plateau [J]. Leather Science and Engineering, 2024, 34(1): 93-100.
[3]	WAN Pengbo, MIAO Rongrong, WANG Pengli, GUO Tianhong, LI Xueqing. Early Warning Threshold Test of the Pressure Monitoring System in the Shoes of Diabetic Patients [J]. Leather Science and Engineering, 2023, 33(6): 77-84.
[4]	ZENG Yiwei, LIU Hai, SHA Chuanlu, ZHOU Jiajing, LI Hui. 3D Printing of Collagen-based Materials and its Application in Regeneration and Repair of Oral Tissue [J]. Leather Science and Engineering, 2023, 33(2): 47-54.
[5]	YANG Luming, LIU Yuan, ZHENG Debin, LIU Qingyun, YAN Shiyang. The Effect of Foot Pronation on Plantar Load Pattern of Healthy Children under Walking Condition [J]. Leather Science and Engineering, 2023, 33(2): 69-74.
[6]	YAO Yunhe, YANG Wenjing, BI Yulin, YE Zhemeng. Simulation of Dongtou Shell Carving Craft based on 3D Printing Technology and its Innovative Application in Footwear Design [J]. Leather Science and Engineering, 2023, 33(1): 80-84.
[7]	JING Lanxiang. Effects of Long-term Wearing High Heels on Women's Plantar Architecture and Pressure [J]. Leather Science and Engineering, 2022, 32(6): 73-78.
[8]	KONG Linghua, YUAN Pengcheng, ZHAO Wei. Application of Movable Prosthetic Foot Device in the Research of Shoe Pressure Comfort [J]. Leather Science and Engineering, 2022, 32(3): 96-99.
[9]	GONG Taisheng, HAN Xuejing, WAN Pengbo, NI Liangchen, WANG Mengyuan, WANG Meng. Research Status of Foot Accessories for Diabetic Patients [J]. Leather Science and Engineering, 2022, 32(3): 42-47.
[10]	LIU Xingchen, XIE Hong, LU Xingyu. Visual Analysis of Plantar Pressure Research based on CiteSpace [J]. Leather Science and Engineering, 2021, 31(5): 82-87.
[11]	LIU Kejiang. Research on the Application and Trend of 3D Printing Technology in Footwear Design and Production [J]. Leather Science and Engineering, 2021, 31(4): 74-78.
[12]	ZHENG Debin, ZHAO Yihong, YAN Shiyang, YANG Luming, HE Youjie. Plantar Pressure Longitudinal Tracking in Children with Flat Feet during Arch Development [J]. Leather Science and Engineering, 2021, 31(3): 61-65.
[13]	LU Lei. Research on the Application of 3D Printing Technology in Polyurethane Synthetic Leather [J]. Leather Science and Engineering, 2021, 31(2): 23-27.
[14]	TANG Yunqi, DAI Xinran, WANG Zhikang, WU Dan, QIN Lei, WEI Yufeng, HUANG Yumeng. Effects of Insole Hardness on Shock Attenuation of Footwear [J]. Leather Science and Engineering, 2020, 30(6): 52-56.
[15]	FENG Xiao, WANG Weiping, SHI Xiaoying, ZHOU Jin, CHEN Yu. Simulation of Diabetic Foot Ulcer Based on Pressure Transfer Model [J]. Leather Science and Engineering, 2020, 30(6): 47-51.