改善超纤革用非织造布力学性能的研究进展

doi:10.19677/j.issn.1004-7964.2024.03.007

Leather Science and Engineering ›› 2024, Vol. 34 ›› Issue (3): 45-50.doi: 10.19677/j.issn.1004-7964.2024.03.007

Previous Articles Next Articles

Research Progress on Improving Mechanical Properties of Nonwovens for Superfiber Leather

LI Jiaxin, QIAN Xiaoming^*, DUO Yongchao, GUO Xun, TANG Xiaoyan

College of Textile Science and Engineering, Tiangong University, Tianjin 300387, China

Received:2023-11-28 Revised:2024-01-03 Accepted:2024-01-04 Published:2024-06-01 Online:2024-04-25

Abstract

Abstract: As one of the important properties of nonwovens for super-fiber leather, the mechanical properties determine the application range of super-fiber leather. Nonwovens for microfiber leather are mostly prepared from sea-island staple fiber or orange-petal filament superfine fiber by acupuncture or spunlaced reinforcement. From the three factors of fiber raw material, this paper mainly analyzed the fiber strength and elongation at break, fiber linear density, fiber length and fiber curl, acupuncture process, and spunlace process. The influence of needle density, needle depth and spunlace pressure on the mechanical properties of nonwovens provides a reference for enhancing the mechanical properties of nonwovens for ultrafine fiber synthetic leather.

Key words: superfine fiber synthetic leather, superfine fiber, needling process, stitching process, mechanical properties

CLC Number:

TS565

LI Jiaxin, QIAN Xiaoming, DUO Yongchao, GUO Xun, TANG Xiaoyan. Research Progress on Improving Mechanical Properties of Nonwovens for Superfiber Leather[J]. Leather Science and Engineering, 2024, 34(3): 45-50.

References

[1] 朵永超,钱晓明,赵宝宝,等.超纤革仿天然皮革研究进展[J].中国皮革,2019,48(3):41-45,53.
DUO Y C,QIAN X M,ZHAO B B,et al.Advances in microfiber synthetic leather emulating natural leather[J].China Leather,2019,48(3):41-45,53.(in Chinese)
[2] 刘凡,钱晓明.超细纤维合成革复合材料的研究进展[J].化工新型材料,2018,46(8):247-250.
LIU F,QIAN X M.Research progress of superfine fiber synthetic leather composite material[J].New Chem Mater,2018,46(8):247-250.(in Chinese)
[3] 高强,范浩军,颜俊,等.三维超疏水超细纤维绒面革的仿生构建[J].纺织学报,2022,43(10):126-132.
GAO Q,FAN H J,YAN J,et al.Bionic construction of three-dimentional super hydrophobic microfiber suede leather[J].J Text Res,2022,43(10):126-132.(in Chinese)
[4] 高龙飞,钱晓明,王立晶,等.上浆浆料对超细纤维合成革性能的影响[J].皮革科学与工程,2021,31(6):39-44.
GAO L F,QIAN X M,WANG L J,et al.Effect of sizing agents on the properties of microfiber synthetic leather[J].Leather Sci Eng,2021,31(6):39-44.(in Chinese)
[5] 高磊,牛家嵘,金欣,等.超细纤维合成革柔软改性的研究进展[J].皮革科学与工程,2022,32(4):54-59.
GAO L,NIU J R,JIN X,et al.Research progress on soft modification of microfiber synthetic leather[J].Leather Sci Eng,2022,32(4):54-59.(in Chinese)
[6] 贺璇,杨光,孙向浩,等.浅析影响超纤合成革用非织造布剥离强度的因素[J].产业用纺织品,2009,27(5):26-28,38.
HE X,YANG G,SUN X H,et al.Analysis of the influence factors on peeling strength of the nonwonvens used for micro-fiber synthetic leather[J].Techn Text,2009,27(5):26-28,38.(in Chinese)
[7] 曾鹏程,李仙敬,郭秉臣.针刺合成革基布的生产[J].产业用纺织品,2010,28(5):23-25,29.
ZENG P C,LI X J,GUO B C.Production practice of needle-punched synthetic leather substrates[J].Techn Text,2010,28(5):23-25,29.(in Chinese)
[8] 窦宝盛. 针刺合成革基布专用涤纶短纤维生产工艺探讨[J].非织造布,2005,13(1):27-29.
DOU B S.Discussion about production process of polyester short fiber specially used in needle-punched synthetic leather substrate[J].Nonwovens,2005,13(1):27-29.(in Chinese)
[9] 窦宝盛. 针刺非织造合成革基布的质量控制[J].非织造布,2004,12(2):23-25.
DOU B S.Quality control of needle punched synthetic leather substrate[J].Nonwovens,2004,12(2):23-25.(in Chinese)
[10] 胡锦文. 超细纤维对超纤革用非织造布力学性能影响的探究[J].中国皮革,2023,52(7):149-153.
HU J W.Influence of superfine fiber on mechanical properties of nonwovens for superfine leather[J].China Leather,2023,52(7):149-153.(in Chinese)
[11] LI Y,JOO C W.Pore structure and liquid behavior of nonwovens composed of nanosized fibers by conjugate spinning[J].J Appl Polymer Sci,2012,126(S2):E252-E259.
[12] 宗丽华,靳向煜,殷保璞.定岛海岛纤维非织造基布的碱减量处理工艺[J].纺织学报,2007,28(3):49-52.
ZONG L H,JIN X Y,YIN B P.Alkali deweighting treatment of sea-island composite fiber nonwoven[J].J Text Res,2007,28(3):49-52.(in Chinese)
[13] DUO Y C,QIAN X M,ZHAO B B,et al.Micro/Nano microfiber synthetic leather base with different nanofiber diameters[J].J Ind Text,2021,50(7):1127-1142.
[14] CHUN H,SUH M W.Distribution of fiber intersections in two-dimensional random fiber web cases with a mixture of two fiber lengths[J].Text Res J,2020,90(15/16):1851-1859.
[15] PAYEN J,VROMAN P,LEWANDOWSKI M,et al.Influence of fiber diameter,fiber combinations and solid volume fraction on air filtration properties in nonwovens[J].Text Res J,2012,82(19):1948-1959.
[16] 刘双营,张琼杰,杨景璇,等.湿态下水刺非织造布性能研究分析[J].山东纺织科技,2023,64(3):21-24.
LIU S Y,ZHANG Q J,YANG J X,et al.Research and analysis on the properties of spunlace nonwoven in wet state[J].Shandong Text Sci Technol,2023,64(3):21-24.(in Chinese)
[17] LEKUBE B M,HERMANN W,BURGSTALLER C.Partially compacted polypropylene glass fiber non-woven composite:Influence of processing,porosity and fiber length on mechanical properties and modeling[J].Compos Part A Appl Sci Manuf,2020,135:105939.
[18] ZHANG Y J,ZHAO Y,LATIFI M,et al.Investigation of the mechanical and dispersible properties of wood pulp/Danufil wetlaid nonwovens with/without hydroentanglement[J].J Text Inst,2018,109(5):647-655.
[19] TABOR J,WUST C,POURDEYHIMI B.The role of staple fiber length on the performance of carded,hydroentangled nonwovens produced with splittable fibers[J].J Eng Fibers Fabr,2019,14.
[20] 普丹丹,孟博洋,朱进忠.牛皮绒纤维的制备及其性能[J].毛纺科技,2021,49(9):11-15.
PU D D,MENG B Y,ZHU J Z.Preparation and performances of leather fibers[J].Wool Text J,2021,49(9):11-15.(in Chinese)
[21] DUO Y C,QIAN X M,ZHAO B B,et al.Preparation and properties of fluffy high-shrinkage polyester/polyamide 6 hollow segmented pie microfiber nonwovens[J].Text Res J,2022,92(17/18):3221-3233.
[22] 封严,张峰.高收缩聚酯纤维对超纤合成革基布性能的影响[J].天津工业大学学报,2020,39(3):22-28,76.
FENG Y,ZHANG F.Effect of high shrinkage polyester fiber on the properties of super-fiber synthetic leather substrates[J]. J Tianjin Polytech Univ,2020,39(3): 22-28, 76.(in Chinese)
[23] 康卫民,任强,程博文.提高水刺非织造布横向断裂强力的研究[J].非织造布,2004,12(4):13-17,19.
KANG W M,REN Q,CHENG B W.Study of improvement on the cross direction tensile of spunlaced nonwovens[J].Nonwovens,2004,12(4):13-17,19.(in Chinese)
[24] 钱晓明,张恒.基于组合技术的先进非织造材料创新方法及其应用[J].纺织导报,2020(1):65-72.
QIAN X M,ZHANG H.Advanced nonwoven materials based on the combination technology and its innovation[J].China Text Leader,2020(1):65-72.(in Chinese)
[25] 甄琪,张恒,张一风,等.针刺工艺对UHMWPE非织造材料防刺性能的影响[J].丝绸,2018,55(5):24-30.
ZHEN Q,ZHANG H,ZHANG Y F,et al.Effect of needle punching process on stab resistance property for UHMWPE nonwovens[J].Silk,2018,55(5):24-30.(in Chinese)
[26] ROY R,ISHTIAQUE S M,DIXIT P,et al.The combined effect of carding and punching parameters on the structural,mechanical and functional properties of needle-punched nonwovens[J].J Ind Text,2022,52:15280837221113085.
[27] ROY R,CHATTERJEE M,ISHTIAQUE S M.Low velocity impact performance and puncture resistance of nonwoven geotextiles with the change of process parameters[J].Fibers Polym,2020,21(1):188-195.
[28] 张煌忠. 针刺机的主要工艺参数分析[J].轻纺工业与技术,2014,43(3):22-24.
ZHANG H Z.Analysis of main process parameters of needle loom machine[J].Text Ind Technol,2014,43(3):22-24.(in Chinese)
[29] 杜明兵,彭超豪.超细纤维合成革用针刺非织造布剥离强度的研究[J].产业用纺织品,2018,36(3):27-30.
DU M B,PENG C H.Study on the peeling strength of needle-punched nonwovens for superfine fiber synthetic leather[J].Techn Text,2018,36(3):27-30.(in Chinese)
[30] 钱幺,刘凡,钱晓明.针刺加工对橘瓣双组分纺粘水刺布过滤性能的影响[J].天津工业大学学报,2017,36(4):38-42.
QIAN Y,LIU F,QIAN X M.Effect of needle processing on filtration performance of segmented pie bicomponent spunbond-spunlace nonwovens[J].J Tianjin Polytech Univ,2017,36(4):38-42.(in Chinese)
[31] 杨娜娜,钱晓明.PET-PA6橘瓣双组分纺粘超纤革非织造基材针刺工艺研究[J].中国皮革,2015,44(17):60-63.
YANG N N,QIAN X M.Needle-punched process of PET-PA6 segmented pie bio-component spunbonded microfiber synthesis leather[J].China Leather,2015,44(17):60-63.(in Chinese)
[32] VENTURA H,ARDANUY M,CAPDEVILA X,et al.Effects of needling parameters on some structural and physico-mechanical properties of needle-punched nonwovens[J].J Text Inst,2014,105(10):1065-1075.
[33] ROY R,ISHTIAQUE S M.Effect of fibre orientation on mechanical and functional properties of needle-punched nonwoven[J].Indian J Fibre Text Res,2019,44(3):321-328.
[34] 欧为兴. 复合技术在针刺非织造布生产中的应用[J].丝网印刷,2023(18):32-34.
OU W X.Application of acupuncture composite non-woven technology in production[J].Silk Screen Print,2023(18):32-34.(in Chinese)
[35] 宗丽华. 海岛纤维非织造基布工艺和产品的研究[D].上海:东华大学,2006.
ZONG L H.Research on the technology and application of sea-island composite fiber nonwovens[D].Shanghai:Donghua University,2006.(in Chinese)
[36] 卢延蔚,钱晓明,张恒.橘瓣型双组分非织造材料的开纤技术及过滤性能[J].合成纤维工业,2014,37(2):64-67.
LU Y W,QIAN X M,ZHANG H.Splitting technology and filtration performance of segmented pie bicomponent nonwovens[J]. China Synth Fiber Ind, 2014, 37(2): 64-67. (in Chinese)
[37] 靳向煜,吴海波,殷保璞.水刺非织造工艺中射流冲击理论的分析[J].纺织学报,2005,26(2):67-68,71.
JIN X Y,WU H B,YIN B P.Impact theory of spun-lacing to fabrics in the water-jetting spun-laced process[J].J Text Res,2005,26(2):67-68,71.(in Chinese)
[38] GULHANE S S,TURUKMANE R,JOSHI M,et al.Hydroentangling process and properties of spunlace nonwovens[J].Chem Fibers Int,2018,68:190-192.
[39] HAJIANI F,HOSSEINI S M,ANSARI N,et al.The influence of water jet pressure settings on the structure and absorbency of spunlace nonwoven[J].Fibers Polym,2010,11(5):798-804.
[40] MAITI S,BELE V S,BASU S K.Effect of material properties and process parameters on properties of hydroentangled nonwoven fabrics[J].J Text Inst,2021,112(6):914-920.
[41] 赵宝宝,钱幺,钱晓明,等.梯度结构双组分纺粘水刺非织造材料的制备及其性能[J].纺织学报,2018,39(5):56-61.
ZHAO B B,QIAN Y,QIAN X M,et al.Preparation and properties of bicomponent spunbond-spunlance nonwoven materials with gradient structure[J].J Text Res,2018,39(5):56-61.(in Chinese)
[42] 黄族健. 针水刺复合海岛超纤合成革基布研发[J].产业用纺织品,2017,35(4):12-16.
HUANG Z J.Research and developing of composite needled and spunlaced sea-island ultra-fine fiber synthetic leather fabrics[J].Techn Text,2017,35(4):12-16.(in Chinese)

Research Progress on Improving Mechanical Properties of Nonwovens for Superfiber Leather

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 4

Recommended Articles

Metrics

Comments

[1]	GAO Bingwen, ZHUANG Junxin, WU Ruwei. Manufacture and Quality Improvement of Automotive Suede Microfiber Leather [J]. Leather Science and Engineering, 2023, 33(5): 62-67.
[2]	PU Hongxia, JI Dingyu, ZHANG Yiwei, DAI Rui, CHEN Hui, SHAN Zhihua. Preparation and Application of Collagen Adhesive [J]. Leather Science and Engineering, 2021, 31(3): 36-40.
[3]	SHEN Yichao, YANG Heng, WANG Shenghua, LONG Chenhui, JIN Yong. Synthesis of Side Hydroxyl-containing Nonionic Surfactants and Application in Leather Retanning [J]. Leather Science and Engineering, 2019, 29(05): 23-27.
[4]	ZHANG Li, MU Shengdong, LING Qiangjun, LONG Yanru, HE Yuting, CHEN Wuyong, GU Haibin. The Fibering and Papermaking Property of Finished Leather Cutting Waste [J]. Leather Science and Engineering, 2019, 29(02): 56-62.